april 2007 rev 8 1/7 7 Z00607 standard 0.8 a triacs main features description the Z00607 is suitable for low power ac switching applications. typical applications include home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... thanks to the low gate triggering current these triacs can be driven directly by microcontrollers. order codes symbol value unit i t(rms) 0.8 a v drm /v rrm 600 v i gt (q 1 ) 5ma part number marking Z00607ma 1ba2 z0607ma Z00607ma 2bl2 z0607ma Z00607ma 5bl2 z0607ma Z00607mn 5aa4 z6m a2 a1 g to-92 Z00607ma sot-223 Z00607mn g a1 a2 a2 g a1 a2 table 1. absolute maximum ratings symbol parameter value unit i t(rms) rms on-state current (full sine wave) sot-223 t tab = 85 c 0.8 a to-92 t l = 50 c i tsm non repetitive surge peak on-state current (full cycle, t j initial = 25 c) f = 50 hz t = 20 ms 9 a f = 60 hz t = 16.7 ms 9.5 i 2 ti 2 t value for fusing t p = 10 ms 0.45 a 2 s di/dt critical rate of rise of on-state current i g = 2 x i gt , t r 100 ns f = 120 hz t j = 110 c 20 a/s i gm peak gate current t p = 20 s t j = 110 c 1 a p g(av) average gate power dissipation t j = 110 c 0.1 w t stg t j storage junction temperature range operating junction temperature range - 40 to + 150 - 40 to + 110 c www.st.com
characteristcs Z00607 2/7 1 characteristcs table 2. electrical characteristics (t j = 25 c, unless otherwise specified) symbol test conditions quadrant value unit i gt (1) 1. minimum i gt is guaranteed at 5% of i gt max. v d = 12 v r l = 30 i - ii - iii max 5 ma iv 7 v gt all max 1.3 v v gd v d = v drm r l = 3.3 k t j = 110 c all min 0.2 v i h (2) i t = 200 ma mx. 5 ma i l i g = 1.2 i gt i - iii - iv max 10 ma ii 20 dv/dt (2) v d = 67% v drm gate open t j = 110 c min 10 v/s (dv/dt)c (2) 2. for both polarities of a2 referenced to a1. (dv/dt)c = 0.35 a/ms t j = 110 c min 1.5 v/s table 3. static characteristics symbol test conditions value unit v tm (1) 1. for both polarities of a2 referenced to a1. i tm = 1.1 a t p = 380 s t j = 25 c max. 1.5 v v to (1) threshold voltage t j = 110 c max. 0.95 v r d (1) dynamic resistance t j = 110 c max. 420 m i drm i rrm v drm = v rrm = 600 v t j = 25 c max. 5a t j = 110 c 0.1 ma table 4. thermal resistances symbol parameter value unit r th(j-t) junction to tab (ac) sot-223 25 c/w r th(j-i) junction to lead (ac) to-92 60 r th(j-a) junction to ambient s (1) = 5 cm 2 1. s = copper surface under tab. sot-223 60 c/w to-92 150
Z00607 characteristcs 3/7 figure 1. maximum power dissipation versus rms on-state current (full cycle) figure 2. relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 p(w) i (a) t(rms) -40 -20 0 20 40 60 80 100 120 0.0 0.5 1.0 1.5 2.0 2.5 i,i,i[t] / gthl j i , i , i [t =25c] gthl j t (c) j i gt i h &i l figure 3. surge peak on-state current versus number of cycles figure 4. non-repetitive surge peak on-state current for a sinusoidal pulse with width t p < 10 ms and corresponding value of i 2 t 1 10 100 1000 0 1 2 3 4 5 6 7 8 9 10 one cycle t=20ms i (a) tsm number of cycles non repetitive t initial = 25c j repetitive t = 25c amb 0.01 0.10 1.00 10.00 0.1 1.0 10.0 100.0 200.0 t (ms) p i (a), i t (a s) tsm 22 it 2 di/dt limitation: 20a/s t initial = 25c j i tsm figure 5. on-state characteristics (maximum values) figure 6. relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values) i (a) tm 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.1 1.0 10.0 v (v) tm t = max. j t j t = 25c j t =max. j v =0.95 v r =420 m t0 d 0.1 1.0 10.0 0.0 2.0 4.0 6.0 8.0 10.0 (di/dt)c [(dv/dt)c] / specified (di/dt)c (dv/dt)c (v/s)
ordering information scheme Z00607 4/7 2 ordering information scheme figure 7. relative variation of critical rate of decrease of main current versus junction temperature figure 8. sot-223 thermal resistance junction to ambient versus copper surface under tab (printed circuit board fr4, copper thickness: 35 m) 0 10 20 30 40 50 60 70 80 90 100 110 0 1 2 3 4 5 6 (di/dt)c [t ] / specified] j (di/dt)c [t j t (c) j r (c/w) th(j-a) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 s(cm2) z 006 07 m a 1ba2 blank triac series current sensitivity voltage package packing mode 006 = 0.8a 07 = 5ma m = 600v a = to-92 n = sot-223 1ba2 = to-92 bulk 2bl2 = to-92 ammopack 5bl2 = to-92 tape and reel 5aa4 = sot-223 tape and reel
Z00607 packaging information 5/7 3 packaging information figure 9. footprint (dimensions in mm) table 5. sot-223 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a1.800.071 a1 0.02 0.10 0.001 0.004 b 0.60 0.70 0.85 0.024 0.027 0.033 b1 2.90 3.00 3.15 0.114 0.118 0.124 c 0.24 0.26 0.35 0.009 0.010 0.014 d (1) 1. do not include mold flash or protrusions. mold flas h or protrusions shall not exceed 0.15mm (0.006inches) 6.30 6.50 6.70 0.248 0.256 0.264 e 2.3 0.090 e1 4.6 0.181 e (1) 3.30 3.50 3.70 0.130 0.138 0.146 h 6.70 7.00 7.30 0.264 0.276 0.287 v 10 max a a1 e1 d b1 h e e 12 4 3 b v c 3.25 1.32 7.80 5.16 1.32 2.30 0.95
ordering information Z00607 6/7 4 ordering information 5 revision history table 6. to-92 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a1.35 0.053 b 4.70 0.185 c2.54 0.100 d4.40 0.173 e 12.70 0.500 f 3.70 0.146 a 0.50 0.019 a f c b a de ordering type marking package weight base quantity delivery mode Z00607ma 1ba2 z0607ma to-92 0.2 g 2500 bulk Z00607ma 2bl2 z0607ma 2000 ammopack Z00607ma 5bl2 z0607ma 2000 tape and reel Z00607mn 5aa4 z6m sot-223 0.12 g 1000 tape and reel date revision description of changes oct-2001 4 last update. 25-mar-2005 5 package: to-92 tape and reel delivery mode 5bl2 added. 21-jun-2005 6 markings updated from z006xxxx to z06xxxx 13-sep-2005 7 Z00607ma 2bl2: marking corrected from 00607ma to z0607ma 12-apr-2007 8 reformatted to current standard. added sot-223 package. changed tj from +125 to +110 in ta bl e 1
Z00607 7/7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2007 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
